Logo

EcoRouter

EcoNAT

EcoQOE

EcoBypass

English

  • Release Notes
  • Справочник команд EcoRouter Documentation / Справочник команд



    В таблице ниже представлен справочник по командам EcoRouter.

    В таблице содержится описание команды, режим консоли, в котором данная команда доступна, роли, для которых команда доступна.

    В столбце "Режим консоли" используются следующие обозначения:

    Польз - пользовательский режим,

    Админ - режим администрирования,

    Конф - режим конфигурации.

    Команды, доступные только для роли admin и запрещенные для любых других ролей, отмечены буквой d (access denied).

     

    КомандаОписание

    Режим

    консоли

    Роли



    adminnochelpdesk
    bgp
    Border Gateway Protocol (BGP)Польз+

    clear
    Reset functionsПольз+

    crypto
    Security specific commandsПольз


    debug
    Debugging functions (see also 'undebug')Польз+

    disable
    Turn off privileged mode commandПольз+++
    enable
    Turn on privileged mode commandПольз+++
    exit
    End current mode and down to previous modeПольз+++
    help
    Description of the interactive help systemПольз+++
    logout
    Exit from the EXECПольз+++
    no
    Negate a command or set its defaultsПольз+++
    ping
    Send echo messagesПольз+

    quit
    Exit current mode and down to previous modeПольз++
    show access-group
    Show access groupПольз++
    show access-list
    Show access list configurationПольз++
    show banner motd
    Show current motd banner messageПольз++
    show bgp

    Border Gateway Protocol (BGP)

    Польз++
    show bridge
    Bridge status and configurationПольз++
    show bridge mac-table
    Bridge mac-tableПольз++
    show cli
    Show CLI tree of current modeПольз++
    show clns
    Connectionless-Mode Network Service (CLNS)Польз++
    show controller
    Controller status and configurationПольз++
    show counters
    CountersПольз++
    show debugging
    Debugging information outputsПольз++
    show dhcp-profile
    DHCP profile configurationПольз++
    show filter-map
    Filterring rulesПольз++
    show flow-export-profile
    Flow export profile configurationПольз++
    show hostname
    HostnameПольз++
    show hw 
    EcoRouter platformПольз++
    show interface
    Interface configurationПольз++
    show ip
    Internet Protocol (IP)Польз++
    show isis

    Intermediate System - Intermediate System (IS-IS)

    Польз++
    show lacp
    LACPПольз++
    show ldp

    Label Distribution Protocol (LDP)

    Польз++
    show list
    Show command listsПольз++
    show users localdb
    Display users database informationПольз+dd
    show log
    Display logПольз++
    show mirror-session

    Mirror session status and configuration

    Польз++
    show mpls
    Show MPLS specific dataПольз++
    show platform
    Show platform informationПольз++
    show port
    Port status and configurationПольз++
    show pppoe
    Point-to-Point over Ethernet (PPPoE)Польз++
    show privilege
    Show current privilege levelПольз++
    show reports
    Show existing reportsПольз++
    show role
    Display information about roleПольз+dd
    show running-config
    Current Operating configurationПольз++
    show security-profile
    Security profileПольз++
    show traffic-classifier
    Traffic classifier status and configurationПольз++
    show traffic-limiter
    Traffic limiter status and configurationПольз++
    show traffic-scheduler
    Traffic scheduler status and configurationПольз++
    show transceiver
    Transceiver informationПольз++
    show uptime
    Show system uptimeПольз++
    show users connected 
    Display information about terminal linesПольз++
    show version
    Display versionПольз++
    show virtual-router
    Virtual Router informationПольз++
    show vrrp
    VRRP informationПольз++
    terminal
    Set terminal line parametersПольз+++
    undebug
    Disable debugging functions (see also 'debug')Польз+++
    virtual-container
    Virtual container settingsПольз


    boot
    Boot options of EcoRouterOSАдмин+

    clear
    Reset functionsАдмин+

    configure terminal
    Enter configuration modeАдмин+

    copy
    Copy from one place to anotherАдмин+

    copy report
    Upload report to remote serverАдмин+

    crypto ca export

    Certification Authority settings

    Админ+

    crypto certificate export
    Display security informationАдмин+

    crypto key export

    User private key

    Админ+

    debug
    Debugging functions (see also 'undebug')Админ+

    delete report
    Delete existing reportsАдмин+

    develop
    Debug commandАдмин+

    disable
    Turn off privileged mode commandАдмин+

    enable
    Turn on privileged mode commandАдмин+

    exit
    End current mode and down to previous modeАдмин+++
    faults
    Fault management commandАдмин+

    help
    Description of the interactive help systemАдмин+++
    image
    Image of EcoRouterOSАдмин+

    login
    Login as a particular userАдмин+++
    logout
    Exit from the EXECАдмин+++
    mstat
    show statistics after multiple multicast traceroutesАдмин+++
    mtrace
    Trace multicast path from source to destinationАдмин+++
    no
    Negate a command or set its defaultsАдмин+

    ping
    Send echo messagesАдмин+++
    poweroff
    Turn system offАдмин+

    quit
    Exit current mode and down to previous modeАдмин+++
    reload
    Halt and perform a cold restartАдмин+

    reload in <1-600>
    Reboot device automatically after a certain timespan (in minutes)Админ+

    reload at <HH:MM>
    Reboot device automatically at a certain time (within 24 hours). HH=00 to 23; MM=00 to 59



    reload cancel
    Cancel the scheduled rebootАдмин+

    restart
    Restart processАдмин+

    show access-group
    Access group Админ++
    show access-list
    Access list configuration Админ++
    show arp 
    ARP table Админ++
    show banner motd
    Show current motd banner message Админ++
    show bgp 
    Border Gateway Protocol (BGP) Админ++
    show boot
    Boot configuration of EcoRouterOSАдмин++
    show bridge 
    Bridge status and configuration Админ++
    show bridge mac-table
    Bridge mac-tableАдмин++
    show cli 
    Show CLI tree of current mode Админ++
    show clns 
    Connectionless-Mode Network Service (CLNS) Админ++
    show controller
    Controller status and configurationАдмин++
    show counters 
    Counters Админ++
    show debugging 
    Debugging functions (see also 'undebug')Админ++
    show develop 
    Debug output Админ++
    show dhcp-profile 
    DHCP profile configuration Админ++
    show faults 
    Show recorded faults Админ++
    show filter-map
    Filterring rulesАдмин++
    show flow-export-profile 
    Flow export profile configuration Админ++
    show hostname 
    Hostname Админ++
    show hw 
    EcoRouter platform Админ++
    show images
    Images that can be used to upgrade EcoRouterOSАдмин++
    show interface 
    Interface configuration Админ++
    show ip 
    Internet Protocol (IP) Админ++
    show isis 
    Intermediate System - Intermediate System (IS-IS) Админ++
    show lacp
    LACPАдмин++
    show ldp 
    Label Distribution Protocol (LDP) Админ++
    show list 
    Show command lists Админ++
    show users localdb 
    Display users database informationАдмин++
    show log
    Display logАдмин++
    show mirror-session 
    Mirror session status and configuration Админ++
    show mpls 
    Show MPLS specific data Админ++
    show mrib 
    MRIB Админ++
    show nsm 
    NSM Админ++
    show ntp
    Configuration NTPАдмин++
    show platform
    Show platform informationАдмин++
    show port 
    Port status and configuration Админ++
    show pppoe 
    Point-to-Point over Ethernet (PPPoE) Админ++
    show privilege 
    Show current privilege level Админ++
    show process 
    Process Админ++
    show process-group
    ProcessАдмин++
    show proc-names
    Show process namesАдмин++
    show reports
    Show existing reportsАдмин++
    show rib 
    RIB Админ++
    show role
    Display information about roleАдмин++
    show route-map 
    Route-map information Админ++
    show router-id 
    Router ID Админ++
    show routing 
    Display routing information Админ++
    show running-config 
    Current Operating configuration Админ++
    show security-profile
    Security profileАдмин++
    show snmp
    Display snmp settingsАдмин++
    show startup-config 
    Contents of startup configuration Админ++
    show tech-support 
    Show router technical information Админ++
    show tech-support-vr 
    Show technical information of non privileged Админ++
    show traffic-classifier 
    Traffic classifier status and configuration Админ++
    show traffic-limiter 
    Traffic limiter status and configurationАдмин++
    show traffic-scheduler 
    Traffic scheduler status and configuration Админ++
    show transceiver 
    Transceiver information Админ++
    show uptime
    Show system uptimeАдмин++
    show users connected  
    Display information about terminal lines Админ++
    show version 
    Display version Админ++
    show virtual-network
    Virtual networkАдмин++
    show virtual-router 
    Virtual Router information Админ++
    show vrrp 
    VRRP informationАдмин++
    start-shell
    Start shellАдмин+

    telnet
    Open a telnet connectionАдмин+++
    terminal
    Set terminal line parametersАдмин+++
    traceroute
    Trace route to destinationАдмин+++
    undebug
    Disable debugging functions (see also 'debug')Админ+

    virtual-container join-swarm
    Virtual container settings. Join a swarm as a nodeАдмин+

    write
    Write running configuration to memory, file or terminalАдмин+

    aaa
    Authentication Authorization AccountingКонф+

    aaa-profile
    AAA server-profile configurationКонф+

    arp
    Address Resolution Protocol (ARP)Конф+

    bandwidth
    Bandwidth configurationКонф+

    banner
    Define a login bannerКонф+

    bgp
    Border Gateway Protocol (BGP)Конф+

    bridge
    Bridge configurationКонф+

    class-map
    Class-map configurationКонф+

    controller
    Controller configurationКонф+

    cvlan
    Configure C-VLAN parametersКонф+

    debug
    Debugging functions (see also 'undebug')Конф+

    debug dns client
    Display DNS debugging messagesКонф+

    dhcp-profile
    Select a DHCP profile to configureКонф+

    do
    To run exec commands in config modeКонф+

    enable container
    Enable containerizationКонф+

    enable password

    Assign the privileged level password

    Конф+

    enable vm
    Enable libvirt/kvm virtualizationКонф+

    exit
    End current mode and down to previous modeКонф+

    fib
    FIB informationКонф+

    filter-map ethernet
    Filter by L2 headerКонф+

    filter-map ipv4
    Filter by L3 headerКонф+

    flow-export-profile
    Flow export profile configurationКонф+

    help
    Description of the interactive help systemКонф+

    hostname
    Set system's network nameКонф+

    hw
    EcoRouter platformКонф+

    interface
    Select an interface to configureКонф+

    ip
    Internet Protocol (IP)Конф+

    IP domain-list
    Define a list of default domain names used to complete unqualified host namesКонф+

    IP domain-lookup
    Enable DNS host name-to-address translationКонф+

    IP domain-name
    Set the default domain name used to complete unqualified host namesКонф+

    IP host
    Define static hostname-to-address mappings in DNSКонф+

    IP name-server
    Add 1-3 DNS server addresses that are used to translate hostnames to IP addressesКонф+

    isis
    Intermediate System - Intermediate System (IS-IS)Конф+

    key
    Authentication key managementКонф+

    l2vpn-vpws
    Configure MPLS specific attributesКонф+

    line
    Configure a terminal lineКонф+

    mac-access-list
    Add an access list entryКонф+

    max-fib-routes
    Set maximum fib routes numberКонф+

    maximum-paths
    Set multipath numbers installed to FIBКонф+

    max-static-routes
    Set maximum static routes numberКонф+

    mirror-session
    Select a mirror session to configureКонф+

    mpls
    Configure MPLS specific attributesКонф+

    no
    Negate a command or set its defaultsКонф+

    ntp
    Configuration NTPКонф+

    oep
    Configure OVC endpoint mapКонф+

    ospf
    Open Shortest Path First (OSPF)Конф+

    platform sensor alarm
    Enable sensor alarm notificationsКонф+

    policy-filter-list
    Add an access list entryКонф+

    port
    Port configurationКонф+

    role
    User role managementКонф+

    route-map
    Create route-map or enter route-map command modeКонф+

    router
    Enable a routing processКонф+

    rsyslog
    rsyslog optionsКонф+

    security
    Set security profileКонф+

    security-profile
    Security profileКонф+

    service
    Setup miscellaneous serviceКонф+

    service-policy
    Service-policy configurationКонф+

    show cli
    Show CLI tree of current modeКонф+

    show list 
    Show command listsКонф+

    show running-config
    Current Operating configurationКонф+

    show hosts
    Display the DNS name servers and domain namesКонф+++
    show running-config dns
    Show the DNS settings the running configurationКонф+++
    snmp
    snmpКонф+

    snmp-server
    Configure snmp serverКонф+

    traffic-class
    Select a traffic class to configureКонф+

    traffic-classifier
    Select a traffic classifier to configureКонф+

    traffic-limiter
    Select a traffic limiter to configureКонф+

    traffic-profile
    Select a traffic profile to configureКонф+

    traffic-scheduler
    Select a traffic scheduler to configureКонф+

    username
    Establish User Name AuthenticationКонф+

    virtual-router
    Virtual-router configurationКонф+

    vlan
    Configure VLAN parametersКонф+

    vrrp
    VRRP configuration  Конф+